T-shaped microstrip patch antenna for RF communications

Authors

  • Sehabeddin Taha Imeci International University of Sarajevo
  • Haris Ackar International University of Sarajevo
  • Faruk Matoruga International University of Sarajevo

DOI:

https://doi.org/10.37868/sei.v3i1.id130

Abstract

The paper presents an upgraded configuration of compact T-shaped microstrip patch antenna design, simulation, fabrication, and test on 1.6mm FR-4 substrate. The microstrip patch antenna is simulated using Sonnet Software. The proposed design is developed to be used as a transmitting antenna operating at 2.4 GHz radio signals with bandwidth ranging from 2.2 GHz to 2.6 GHz, and with input, match S11 less than -27 dB on 2.4 GHz frequency. The gain of the proposed antenna is 7.28 dB. The antenna was fabricated and measured results match with simulated in terms of frequency but measured S11 is lower due to lossy dielectric FR-4.

Published

2021-03-16

How to Cite

[1]
S. T. Imeci, H. Ackar, and F. Matoruga, “T-shaped microstrip patch antenna for RF communications ”, Sustainable Engineering and Innovation, vol. 3, no. 1, pp. 38-43, Mar. 2021.

Issue

Vol. 3 No. 1 (2021)

Section

Articles

Copyright (c) 2021 Sehabeddin Taha Imeci, Haris Ackar, Faruk Matoruga

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.