Microstrip hybrid wideband 10 dB coupler

Authors

  • Mustafa Indžić International University of Sarajevo
  • Sehabeddin Taha Imeci International University of Sarajevo

DOI:

https://doi.org/10.37868/sei.v3i2.id132

Abstract

In this paper, the design, simulation, optimization and testing of a Microstrip Hybrid 10 dB Wideband Coupler was done. The aim of the project was to introduce a new coupler design and to achieve stable operation for as wide bandwidth as possible. For this proposed design simulated results are as follows: 3.8 GHz Bandwidth and Coupling Amplitude balance of 1 dB across it. Coupler is then produced using LPKF ProtoMat 104s machine and it is tested with Vector Network Analyzer at Istanbul Technical University.

Published

2021-05-29

How to Cite

[1]
M. Indžić and S. T. Imeci, “Microstrip hybrid wideband 10 dB coupler”, Sustainable Engineering and Innovation, vol. 3, no. 2, pp. 73-78, May 2021.

Issue

Vol. 3 No. 2 (2021)

Section

Articles

Copyright (c) 2021 Mustafa Indžic, Sehabeddin Taha Imeci

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.