Study the impact of different preparation methods on the structural and dielectric properties of nickel-zinc ferrite
DOI:
https://doi.org/10.37868/sei.v3i2.id117Abstract
In the current study, nickel-zinc ferrite nanoparticles Ni (1-x) ZnxFe2O4 (X= 0, 0.25, 0.50, 0.75, 1) have been arranged by sol-gel auto combustion and common chemical precipitation methods, The samples were described by x-ray (XRD) deflection, Fourier converts Infrared Spectroscopy (FTIR), dielectric perpetual and dielectric loss element. the XRD analysis confirms the cubic lone phase spinel configuration for all the synthesized materials. Average crystalline size is estimated of the (311) peaks of the x-ray diffractogram using Scherrer’s formulation institute in the range 38.90 to 37.71 nm for sol-gel auto burning method and from 18.61 to 23.41 nm for co-precipitation method. The Fourier transform infrared spectroscopy was studied so as to assert the construction of the spinel phase and to recognize the kind of carbon remaining in the samples. The dielectric fixed and the dielectric loss factor were measured in the range between 50 Hz – 3 MHz at room temperature were located to be reduced with a rise in regularity.
Published
How to Cite
Issue
Section
Copyright (c) 2021 Marwa Taha Jasim

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.